Acasi
Gap Transfer GT-48 Parts | Belt System B
$ 0.00 USD
/
STRUCTURE | BELT SYSTEM A | BELT SYSTEM B
| Item | Part No. | Part Name | Price |
|---|---|---|---|
| 2 | 996-18-312 | MetricRuler 0.25in x 14cm |  |
| 4 | M1-35462548 | 0.50in stainless steel pressure collar, one piece | |
| 6 | M1-75368829 | Metal backed 1 in OD, 0.88 in ID x 1 in | |
| 8 | M1-77153450 | Flat washer brass; ID 0.56; OD 1.25 | |
| 10 | 997-19-350 | Structure tube GT-17 B | |
| 12 | 996-18-322 | Threaded rod guide 1 | |
| 14 | 996-18-324 | Gear spur - threaded rod guide separator | |
| 16 | 996-18-305 V2 | Front threaded rod 1 | |
| 18 | M1-78340767 | ASA 35, 14 teeth 0.500 bore | |
| 20 | 996-18-326L | Tube 28 bushing left hand | |
| Item | Part No. | Part Name | Price |
|---|---|---|---|
| 22 | 996-18-308 V2 | Horizontal shaft | |
| 24 | NOF-0.375-01-023 | Washer, ID 0.406in, OD 1.250in | |
| 26 | 25C50KBCS | 1/4-20 x 1/2 BUTTON SOCKET CAP SCREW S/S | |
| 28 | 997-19-320E | Horizontal shafts base | |
| 30 | 997-19-306 | GT belt system top plate | |
| 32 | 5IK90GE-SW2 / 5GE15SA | Induction motor 1/8 HP 3-Ph 220 VAC - 60rpm | |
| 34 | 997-19-218 | Acetal belt guide 1in | |
| 36 | 995-222 | Induction motor separator GT | |
| 38 | 200080 | Timing belt Pulleys-Idler pulley 1in | |
| 40 | 200110 | Separator-Idler shaft | |
| Item | Part No. | Part Name | Price |
|---|---|---|---|
| 42 | 997-19-216 | Top belt guide 2 | |
| 44 | APL-MBB-R12ZZ | Sealed bearing R12ZZ | |
| 46 | 550-580 | Tensioning belt support | |
| 48 | WUR-75VWUSI | 3/4" USS Flat washer, ID 0.812", OD 1.875", thick 0.102" | |
| 50 | 997-19-215 | GT belt system bottom plate | |
| 52 | FNS-1050H100 NG-L-1 | Timing belt 1050H100 NG-L-1, 210 teeth, pitch 0.5in, width 1in, single sided | |
| 54 | 995-220 | Servo R88M_KE20030H_S2 coupling | |
| 56 | 996-236 | Drive pulley 1in belt SO | |
| 58 | 996-238 | Servo coupling support | |
Pickup available at 7085 NW 46th Street
Payment
