filler

Automatic inline bottle cap tightener machine with cap sorter and feeder type waterfall, model CAI-X-WFall dimensions, by Acasi Machinery Inc.

Automatic Inline Bottle Capping Machine Model CAI-X-WFall Drawings

ACASI Inline Cap Tightener Model CAI-10X

CAI-WFall Starting Prices
4 Spindle CAI-WFall:

6 Spindle CAI-WFall:

8 Spindle CAI-WFall:

Tightener Features:

Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
Heavy duty linear carriage system for height adjustability
All shafts and threaded rods manufactured in 304 stainless steel
Heavy duty casters standard
No change of parts needed for a wide range of containers
Front and back covers with safety interlock switches standard
Top driven to insure no product spillage into drive assembly
Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment)

Capping discs features:

4, 6 or 8 spindle configurations available, single gear box driven
Independent spring loaded capping discs for better torque and misalignment forgiveness
Torque is able to be adjusted while the machine is running
Clutches located away from capping discs to avoid corrosion
Heavy duty gear driven mechanism; no belts used for power transmission
Mechanical clutch assemblies standard (Optional pneumatic clutch upgrade available)
Adjustable speed 1 Hp 3 phase drive motor for capping discs
Optional second drive motor to rotate the first set of capping discs on the opposite direction
Most bearings protected by seals
Capping head assembly manufactured in 316L stainless steal
All parts manufactured in stainless steel or FDA approved polymer materials
Independent adjustment for front or back capping discs
Capping disc position is adjustable while the machine is running, without opening the safety covers
Fully adjustable for cap sizes ranging from 8 mm to 130 mm in diameter

Bottle belt features:

Bottle belt width adjusted via front knobs
Bottle belt height adjusted via front knobs
Heavy duty gear drive mechanism; no belts used for power transmission
Adjustable speed heavy duty 1 Hp 3 phase motor gearbox
Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers
Optional double belt assembly with independent height and angle adjustment

Electric and pnuematic requirements:

208 - 240 Volts, Single phase, 50/60Hz, 15 Amps
5 CFM @ 80 p.s.i.

ACASI Cap Feeder Model CF-4400
Features:

Construction in stainless steel
18 inches wide belt
Cap feeder is adjustable for caps from 8mm to 110mm in diameter via quick adjust knobs
Caps feed on demand; controlled by photoelectric sensor
Air shutoff valve controlled by photoelectric sensor
Includes air regulator and filter
Feeder inclination adjustable from 0 to 5 degrees
Complete height adjustment by structure 1 inch bolts and/or cap delivery system
10 cubic feet cap hopper
Drive provided by DC gear motor
Independent Speed Control (potentiometer)

+ Quick View

Automatic Inline Bottle Capping Machine Model CAI-X-WFall Drawings

ACASI Inline Cap Tightener Model CAI-10X CAI-WFall Starting Prices4 Spindle CAI-WFall: 6 Spindle CAI-WFall: 8...

View full product details →

Automatic Inline Bottle Capping Machine Model CAI-X-WFall Parts

ACASI Inline Cap Tightener Model CAI-10X

CAI-WFall Starting Prices

4 Spindle CAI-WFall:

6 Spindle CAI-WFall:

8 Spindle CAI-WFall:

Tightener Features:

Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
Heavy duty linear carriage system for height adjustability
All shafts and threaded rods manufactured in 304 stainless steel
Heavy duty casters standard
No change of parts needed for a wide range of containers
Front and back covers with safety interlock switches standard
Top driven to insure no product spillage into drive assembly
Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment)

Capping discs features:

4, 6 or 8 spindle configurations available, single gear box driven
Independent spring loaded capping discs for better torque and misalignment forgiveness
Torque is able to be adjusted while the machine is running
Clutches located away from capping discs to avoid corrosion
Heavy duty gear driven mechanism; no belts used for power transmission
Mechanical clutch assemblies standard (Optional pneumatic clutch upgrade available)
Adjustable speed 1 Hp 3 phase drive motor for capping discs
Optional second drive motor to rotate the first set of capping discs on the opposite direction
Most bearings protected by seals
Capping head assembly manufactured in 316L stainless steal
All parts manufactured in stainless steel or FDA approved polymer materials
Independent adjustment for front or back capping discs
Capping disc position is adjustable while the machine is running, without opening the safety covers
Fully adjustable for cap sizes ranging from 8 mm to 130 mm in diameter

Bottle belt features:

Bottle belt width adjusted via front knobs
Bottle belt height adjusted via front knobs
Heavy duty gear drive mechanism; no belts used for power transmission
Adjustable speed heavy duty 1 Hp 3 phase motor gearbox
Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers
Optional double belt assembly with independent height and angle adjustment

Electric and pnuematic requirements:

208 - 240 Volts, Single phase, 50/60Hz, 15 Amps
5 CFM @ 80 p.s.i.

ACASI Cap Feeder Model CF-4400
Features:

Construction in stainless steel
18 inches wide belt
Cap feeder is adjustable for caps from 8mm to 110mm in diameter via quick adjust knobs
Caps feed on demand; controlled by photoelectric sensor
Air shutoff valve controlled by photoelectric sensor
Includes air regulator and filter
Feeder inclination adjustable from 0 to 5 degrees
Complete height adjustment by structure 1 inch bolts and/or cap delivery system
10 cubic feet cap hopper
Drive provided by DC gear motor
Independent Speed Control (potentiometer)

+ Quick View

Automatic Inline Bottle Capping Machine Model CAI-X-WFall Videos

ACASI Inline Cap Tightener Model CAI-10X

CAI-WFall Starting Prices
4 Spindle CAI-WFall:

6 Spindle CAI-WFall:

8 Spindle CAI-WFall:

Tightener Features:

Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
Heavy duty linear carriage system for height adjustability
All shafts and threaded rods manufactured in 304 stainless steel
Heavy duty casters standard
No change of parts needed for a wide range of containers
Front and back covers with safety interlock switches standard
Top driven to insure no product spillage into drive assembly
Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment)

Capping discs features:

4, 6 or 8 spindle configurations available, single gear box driven
Independent spring loaded capping discs for better torque and misalignment forgiveness
Torque is able to be adjusted while the machine is running
Clutches located away from capping discs to avoid corrosion
Heavy duty gear driven mechanism; no belts used for power transmission
Mechanical clutch assemblies standard (Optional pneumatic clutch upgrade available)
Adjustable speed 1 Hp 3 phase drive motor for capping discs
Optional second drive motor to rotate the first set of capping discs on the opposite direction
Most bearings protected by seals
Capping head assembly manufactured in 316L stainless steal
All parts manufactured in stainless steel or FDA approved polymer materials
Independent adjustment for front or back capping discs
Capping disc position is adjustable while the machine is running, without opening the safety covers
Fully adjustable for cap sizes ranging from 8 mm to 130 mm in diameter

Bottle belt features:

Bottle belt width adjusted via front knobs
Bottle belt height adjusted via front knobs
Heavy duty gear drive mechanism; no belts used for power transmission
Adjustable speed heavy duty 1 Hp 3 phase motor gearbox
Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers
Optional double belt assembly with independent height and angle adjustment

Electric and pnuematic requirements:

208 - 240 Volts, Single phase, 50/60Hz, 15 Amps
5 CFM @ 80 p.s.i.

ACASI Cap Feeder Model CF-4400

Features:

Construction in stainless steel
18 inches wide belt
Cap feeder is adjustable for caps from 8mm to 110mm in diameter via quick adjust knobs
Caps feed on demand; controlled by photoelectric sensor
Air shutoff valve controlled by photoelectric sensor
Includes air regulator and filter
Feeder inclination adjustable from 0 to 5 degrees
Complete height adjustment by structure 1 inch bolts and/or cap delivery system
10 cubic feet cap hopper
Drive provided by DC gear motor
Independent Speed Control (potentiometer)

+ Quick View

Automatic inline bottle capping machine, model TruCap-X-Cent dimensions, by Acasi Machinery Inc.

Automatic Inline Bottle Capping Machine Model TruCap-X-Cent Drawings

ACASI Inline Bottle Capper with Centrifugal cap feeder
Model TruCap-X-Cent

Starting Prices:

4 spindle in line capper with centrifugal cap sorter:

6 spindle in line capper with centrifugal cap sorter:

8 spindle in line capper with centrifugal cap sorter:

Tightener Features:

Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors.
Heavy duty linear carriage system for height adjustability
All shafts and threaded rods manufactured in 304 stainless steel
Heavy duty casters standard
No change of parts needed for a wide range of containers
Front covers with safety interlock switches standard
Top driven to insure no product spillage into drive assembly
Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment)

Capping discs features:

4, 6, or 8 spindle machine configurations available, single gear box driven
Independent spring loaded capping discs for better torque and misalignment forgiveness.
Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased)
Clutches located away from capping discs to avoid corrosion
Heavy duty gear driven mechanism, no belts used for power transmission
Adjustable speed 1/2 Hp drive motor for bottle capping discs
Optional second drive motor to rotate the first set of capping discs on the opposite direction
Bottle capping head assembly manufactured in 316L stainless steel 95% of manufactured parts are in stainless steel, or FDA approved polymer materials
Independent adjustment for front or back capping discs
Bottle capping disc position is adjustable while the machine is running, without opening the safety covers.
Fully adjustable for caps sizes ranging from 8 mm to 130 mm in diameter

Bottle belts features:

Bottle belt width adjusted via front knobs
Bottle belt height adjusted via front knobs
Heavy duty gear drive mechanism, no belts used for power transmission.
Adjustable speed heavy duty 1/2 Hp, motor gearbox
Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers.
Optional double belt assembly with independent height and angle adjustment

Centrifugal type cap feeder features:

Construction in stainless steel.
32 inch diameter feeding disc ‐ ramp assembly.
Cap rejecting by photoelectric sensor.
Cap by demand controlled by photoelectric sensor.
Standard 4 pieces slotted cross for easy tooling adjustment.
Easy changeover for caps from 10mm to 90mm in diameter.
Easy changeover for caps from 0.125 to 2.5 inches in height.
Sorter mounted on machine, no need for independent height adjustment.
Includes filter pressure regulator.
Flow controls on all air hoses.
Adjustable vibration system on cap hopper.
Force provided by 1/3 Hp DC gear motor.
Speed control by potentiometer.

Cap hopper features:

3 Cubic feet stainless steel deposit.
Vibrator with independent control mounted on cap hopper.
Low friction limit switch for cap level sensing on centrifugal cap feeder.

Electric and pneumatic requirements:

220 Volts, Single phase, 50/60Hz, 15 Amps.
10 CFM @ 80 p.s.i.

+ Quick View

Automatic Inline Bottle Capping Machine Model TruCap-X-Cent Videos

ACASI Inline Bottle Capper with Centrifugal cap feeder
Model TruCap-X-Cent

Starting Prices:
4 spindle in line capper with centrifugal cap sorter:
6 spindle in line capper with centrifugal cap sorter:
8 spindle in line capper with centrifugal cap sorter:

Tightener Features:

Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors.
Heavy duty linear carriage system for height adjustability
All shafts and threaded rods manufactured in 304 stainless steel
Heavy duty casters standard
No change of parts needed for a wide range of containers
Front covers with safety interlock switches standard
Top driven to insure no product spillage into drive assembly
Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment)

Capping discs features:

4, 6, or 8 spindle machine configurations available, single gear box driven
Independent spring loaded capping discs for better torque and misalignment forgiveness.
Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased)
Clutches located away from capping discs to avoid corrosion
Heavy duty gear driven mechanism, no belts used for power transmission
Adjustable speed 1/2 Hp drive motor for bottle capping discs
Optional second drive motor to rotate the first set of capping discs on the opposite direction
Bottle capping head assembly manufactured in 316L stainless steel 95% of manufactured parts are in stainless steel, or FDA approved polymer materials
Independent adjustment for front or back capping discs
Bottle capping disc position is adjustable while the machine is running, without opening the safety covers.
Fully adjustable for caps sizes ranging from 8 mm to 130 mm in diameter

Bottle belts features:

Bottle belt width adjusted via front knobs
Bottle belt height adjusted via front knobs
Heavy duty gear drive mechanism, no belts used for power transmission.
Adjustable speed heavy duty 1/2 Hp, motor gearbox
Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers.
Optional double belt assembly with independent height and angle adjustment

Centrifugal type cap feeder features:

Construction in stainless steel.
32 inch diameter feeding disc ‐ ramp assembly.
Cap rejecting by photoelectric sensor.
Cap by demand controlled by photoelectric sensor.
Standard 4 pieces slotted cross for easy tooling adjustment.
Easy changeover for caps from 10mm to 90mm in diameter.
Easy changeover for caps from 0.125 to 2.5 inches in height.
Sorter mounted on machine, no need for independent height adjustment.
Includes filter pressure regulator.
Flow controls on all air hoses.
Adjustable vibration system on cap hopper.
Force provided by 1/3 Hp DC gear motor.
Speed control by potentiometer.

Cap hopper features:

3 Cubic feet stainless steel deposit.
Vibrator with independent control mounted on cap hopper.
Low friction limit switch for cap level sensing on centrifugal cap feeder.

Electric and pneumatic requirements:

220 Volts, Single phase, 50/60Hz, 15 Amps.
10 CFM @ 80 p.s.i.

+ Quick View

Automatic Inline Bottle Capping Machine Model TruCap-X-WFall Drawings

ACASI Inline Bottle Capper with Waterfall cap feeder

Model TruCap-X-WFall

Starting Prices:

4 spindle in line capper with centrifugal cap sorter:

6 spindle in line capper with centrifugal cap sorter:

8 spindle in line capper with centrifugal cap sorter:

Tightener Features:

Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors.
Heavy duty linear carriage system for height adjustability
All shafts and threaded rods manufactured in 304 stainless steel
Heavy duty casters standard
No change of parts needed for a wide range of containers
Front covers with safety interlock switches standard
Top driven to insure no product spillage into drive assembly
Adjustable height to accommodate containers from 1 inch to14 inches tall (Optional power height adjustment).

Capping discs features:

4, 6, or 8 spindle machine configurations available, single gear box driven
Independent spring loaded bottle capping discs for better torque and misalignment forgiveness.
Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased)
Clutches located away from capping discs to avoid corrosion
Heavy duty gear driven mechanism, no belts used for power transmission
Adjustable speed 1/2 Hp drive motor for bottle capping discs
Optional second drive motor to rotate the first set of capping discs on the opposite direction
Capping head assembly manufactured in 316L stainless steel 95% of manufactured parts are in stainless steel, or FDA approved polymer materials
Independent adjustment for front or back capping discs
Capping disc position is adjustable while the machine is running, without opening the safety covers.
Fully adjustable for bottle cap sizes ranging from 8 mm to 130 mm in diameter

Bottle belts features:

Bottle belt width adjusted via front knobs
Bottle belt height adjusted via front knobs
Heavy duty gear drive mechanism, no belts used for power transmission.
Adjustable speed heavy duty 1/2 Hp, motor gearbox
Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers.
Optional double belt assembly with independent height and angle adjustment

Waterfall feeder features:

Construction in stainless steel
18 inch wide belt
Cap feeder is adjustable for bottle caps from 8mm to 110mm in diameter, via quick adjust knobs
Caps feed on demand, controlled by photoelectric sensor
Air shutoff valve controlled by photoelectric sensor
Includes air regulator and filter
Feeder inclination adjustable from 0 to 5 degrees
Complete height adjustment by structure 1 inch bolts and/or cap delivery system.
10 cubic foot cap hopper
Drive provided by DC gear motor.
Independent Speed Control (potentiometer)

Electric and pneumatic requirements:

220 Volts, Single phase, 50/60Hz, 15 Amps.
10 CFM @ 80 p.s.i.

+ Quick View

Automatic Inline Bottle Capping Machine Model TruCap-X-WFall Videos

ACASI Inline Bottle Capper with Waterfall cap feeder

Model TruCap-X-WFall

Starting Prices:
4 spindle in line capper with centrifugal cap sorter:
6 spindle in line capper with centrifugal cap sorter:
8 spindle in line capper with centrifugal cap sorter:

Tightener Features:

Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors.
Heavy duty linear carriage system for height adjustability
All shafts and threaded rods manufactured in 304 stainless steel
Heavy duty casters standard
No change of parts needed for a wide range of containers
Front covers with safety interlock switches standard
Top driven to insure no product spillage into drive assembly
Adjustable height to accommodate containers from 1 inch to14 inches tall (Optional power height adjustment).

Capping discs features:

4, 6, or 8 spindle machine configurations available, single gear box driven
Independent spring loaded bottle capping discs for better torque and misalignment forgiveness.
Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased)
Clutches located away from capping discs to avoid corrosion
Heavy duty gear driven mechanism, no belts used for power transmission
Adjustable speed 1/2 Hp drive motor for bottle capping discs
Optional second drive motor to rotate the first set of capping discs on the opposite direction
Capping head assembly manufactured in 316L stainless steel 95% of manufactured parts are in stainless steel, or FDA approved polymer materials
Independent adjustment for front or back capping discs
Capping disc position is adjustable while the machine is running, without opening the safety covers.
Fully adjustable for bottle cap sizes ranging from 8 mm to 130 mm in diameter

Bottle belts features:

Bottle belt width adjusted via front knobs
Bottle belt height adjusted via front knobs
Heavy duty gear drive mechanism, no belts used for power transmission.
Adjustable speed heavy duty 1/2 Hp, motor gearbox
Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers.
Optional double belt assembly with independent height and angle adjustment

Waterfall feeder features:

Construction in stainless steel
18 inch wide belt
Cap feeder is adjustable for bottle caps from 8mm to 110mm in diameter, via quick adjust knobs
Caps feed on demand, controlled by photoelectric sensor
Air shutoff valve controlled by photoelectric sensor
Includes air regulator and filter
Feeder inclination adjustable from 0 to 5 degrees
Complete height adjustment by structure 1 inch bolts and/or cap delivery system.
10 cubic foot cap hopper
Drive provided by DC gear motor.
Independent Speed Control (potentiometer)

Electric and pneumatic requirements:

220 Volts, Single phase, 50/60Hz, 15 Amps.
10 CFM @ 80 p.s.i.

+ Quick View

Automatic inline bottle cleaner with dry or wet cleaning options, model BR-15 dimensional, by Acasi Machinery Inc.

Automatic Inline Bottle Cleaner Model BR15 Drawings

ACASI Automatic inline bottle cleaner- Model BR 15 machine (conveyor or options included):

Construction features:

304 Stainless steel heavy duty stainless steel welded frame.
Up to 16 cleaning nozzles.
All contact parts are stainless steel, sanitary, Teflon, Viton and hoses per your requirements.
Special seals or hoses by order.
Calibrated guide for fast height changeovers.

Control panel features:

Omron PLC for all machine logic functions, special modifications on programs available for special adaptations.
6in Omron HMI for all machine functions and delays.
Frequency control drive conveyor speed, acceleration and deceleration.
Pump pressure, cleaning and drying time controlled on HMI.
Front panel Start and Emergency STOP for easy access.
Fiber optic sensors by Omron standard for container gating.
No bottle no cycle PLC controlled.

Cleaning options:

Dry: Air ionizing and suction.
Wet: Water or product cleaning with wet nozzle. Pressure control as well as drying time all controlled in HMI.

Standard features:

Individual bottle hold for reliable operation.
Container height adjustment from 1½ to 12 inches high.
Bottle turning via heavy duty pneumatic rotary actuator.
Entry and exit bottle gating cylinders adjustable, sideways, up and down and inside and outside.
Will work with plastic or glass containers.
No change parts needed for various types of containers.
Air filter-regulator and safety lockout valve included.
Spacing and additional bottle control obtained by flow controls mounted on air gating cylinders.

Tank pump options:

Electric heater with temperature control on HMI.
Double wall insulated tank.

Electric and pneumatic requirements:

Standard - 220V, 50Hz or 60Hz, 10 Amps
20 CFM @ 80 p.s.i.

+ Quick View

Automatic Inline Bottle Cleaner Model BR15 Videos

ACASI Automatic inline bottle cleaner- Model BR 15 machine (conveyor or options included):

Construction features:

304 Stainless steel heavy duty stainless steel welded frame.
Up to 16 cleaning nozzles.
All contact parts are stainless steel, sanitary, Teflon, Viton and hoses per your requirements.
Special seals or hoses by order.
Calibrated guide for fast height changeovers.

Control panel features:

Omron PLC for all machine logic functions, special modifications on programs available for special adaptations.
6in Omron HMI for all machine functions and delays.
Frequency control drive conveyor speed, acceleration and deceleration.
Pump pressure, cleaning and drying time controlled on HMI.
Front panel Start and Emergency STOP for easy access.
Fiber optic sensors by Omron standard for container gating.
No bottle no cycle PLC controlled.

Cleaning options:

Dry: Air ionizing and suction.
Wet: Water or product cleaning with wet nozzle. Pressure control as well as drying time all controlled in HMI.

Standard features:

Individual bottle hold for reliable operation.
Container height adjustment from 1½ to 12 inches high.
Bottle turning via heavy duty pneumatic rotary actuator.
Entry and exit bottle gating cylinders adjustable, sideways, up and down and inside and outside.
Will work with plastic or glass containers.
No change parts needed for various types of containers.
Air filter-regulator and safety lockout valve included.
Spacing and additional bottle control obtained by flow controls mounted on air gating cylinders.

Tank pump options:

Electric heater with temperature control on HMI.
Double wall insulated tank.

Electric and pneumatic requirements:

Standard - 220V, 50Hz or 60Hz, 10 Amps
20 CFM @ 80 p.s.i.

+ Quick View

Automatic inline bottle cleaner with dry or wet cleaning options, model BR-15, Assy 975-300, by Acasi Machinery Inc.

Automatic Inline Bottle Cleaner Model BR15 | Clamping And Turning Mechanism

STRUCTURE- TRAY AND COVERS | ELECTRIC PANEL TOUCH

TANK | RINSER SYSTEM | CLAMPING AND TURNING MECHANISM

975-300 | 975-300 V3

+ Quick View

Automatic Inline Bottle Cleaner Model BR15 | Clamping And Turning Mechanism (975-300 V3)

STRUCTURE- TRAY AND COVERS | ELECTRIC PANEL TOUCH

TANK | RINSER SYSTEM | CLAMPING AND TURNING MECHANISM

975-300 | 975-300 V3

Item	Part No.	Part Name
2	CDRA1BSU100-180-J59L-XN	Rotary Actuator
4	975-354	Rotary actuator plate support
6	975-352-1	Rotary actuator plate separator
8	975-360	Rotary actuator coupling
10	HCSLF208-24	UCF208-24, UCF - Four-Bolt Flanged Unit
12	975-328	BR seal holder
14	975-308	Turning mechanism arm Separator
16	975-316	Turning mechanism rail B
18	975-S-314	Turning mechanism rail A
20	975-326	Turning mechanism height adjuster nut
22	975-324	Turning mechanism arm separator B

Item	Part No.	Part Name
24	975-S-318	Turning mechanism arm C 318
26	975-396	Rotary Actuator Guide C
28	975-357	Turning mechanism Height Adjuster
30	975-330-2	Turning mechanism drive shaft
32	975-S-371	Turning mechanism Spacer
34	MCM-6389K417	Nylon Sleeve Bearing
36	975-S-365	Bottle Rinser Counterweight Epoxi Painted
38	975-S-322	Turning mechanism Height Adjuster
40	975-S-320	Turning mechanism arm C 320
42	975-362-1	Chassis Leg TC Fixer
44	975-358	Turning mechanism stopper

Item	Part No.	Part Name
46	PEER-77R16	Bearing R16
48	CAI-10X-13-056	Housing bearing
50	975-HoH-400	Rear Bottle Pusher Support B
52	975-136	Rear Bottle Pusher Support A
54	975-398	Rear Bottle Pusher Support A-Spacer
56	975-353-1	Rotary Actuator Plate Separator
58	975-S-343	Turning Mechanism Height Adjuster
60	975-S-312	Turning Mechanism Arm C
62	975-338	BR Bottle Plastic Gripper
64	975-348 V3	Polyurethane Bottle Pusher Tube Adjuster
65	975-306-2-PET	BR Protector Front Clamping

Item	Part No.	Part Name
66	975-374	Pneumatic Actuator Support 374
68	975-412	Rotary Actuator Attachment
70	975-376	Rotary actuator arm
72	975-412-B	Rotary Actuator Separator
74	PT-037090	Rotary Actuator
76	975-302E-LE	BR Sheet Front Clamping
78	975-414	Rotary Actuator Guide
80	975-304	Turning Mechanism Arm Fixer
82	975-S-355	Nut Sheet
84	975-370	Turning Mechanism Rail Nut
86	975-S-310	Turning Mechanism Arm B
88	975-364 V2	Turning Mechanism Stopper Cover
90	975-366	Chassis Leg TC Cap
92	975-346	Polyurethane Bottle Pusher Rail
94	ADA-FT-040.5-KS	Pneumatic Cylinder Bore 0.75
96	975-368	Polyurethane Bottle Pusher Stoper
98	975-344	Polyurethane Bottle Pusher Pusher Holder B
100	975-342	Polyurethane bottle pusher holder
102	975-340	Polyurethane bottle pusher

+ Quick View

Automatic Inline Bottle Cleaner Model BR15 | Clamping And Turning Mechanism (975-300)

STRUCTURE- TRAY AND COVERS | ELECTRIC PANEL TOUCH

TANK | RINSER SYSTEM | CLAMPING AND TURNING MECHANISM

975-300 | 975-300 V3

Item	Part No.	Part Name
2	CDRA1BSU100-180-J59L-XN	Rotary Actuator
4	975-354	Rotary actuator plate support
6	975-352	Rotary actuator plate separator
8	975-360	Rotary actuator coupling
10	HCSLF208-24	UCF208-24, UCF - Four-Bolt Flanged Unit
12	975-328	BR seal holder
14	975-310	Turning mechanism arm B
16	975-320	Turning mechanism arm A
18	975-316	Turning mechanism rail B
20	975-326	Turning mechanism height adjuster nut
22	975-324	Turning mechanism arm separator B

Item	Part No.	Part Name
24	975-312	Turning mechanism arm C
26	975-318	Turning mechanism arm D
28	975-353	Rotary actuator plate separator
30	975-330	Turning mechanism drive shaft
32	975-302	BR sheet front clamping
34	975-306	BR protector front clamping
36	975-338	BR bottle plastic gripper
38	M1-06979801	Compression spring OD0.500 - wire 0.067"
40	975-348	Polyurethane bottle pusher tube adjuster
42	975-336	BR spring bottom support
44	975-334	BR spring bottom support B

Item	Part No.	Part Name
46	975-340	Polyurethane bottle pusher
48	975-342	Polyurethane bottle pusher holder
50	975-368	Polyurethane bottle pusher stoper
52	975-344	Polyurethane bottle pusher holder B
54	975-306-2	BR protector front clamping
56	975-346	Polyurethane bottle pusher rail
58	ADA-FT-040.5-KS	Pneumatic cylinder bore 0.75
60	975-314	Turning mechanism rail A
62	975-304	Turning mechanism arm fixer
64	975-308	Turning mechanism arm separator
66	975-322	Turning mechanism height adjuster

Item	Part No.	Part Name
68	975-370	Turning mechanism rail nut
70	975-362	Chassis leg TC fixer
72	975-366	Chassis leg TC cap
74	CAI-10X-13-056	Housing bearing
76	PEER-R16 ZZ	Bearing R16
78	975-364 V2	Chassis leg TC
80	975-358	Turning mechanism stopper
82	975-378	Rotary actuator attachment
84	975-372	Rotary actuator guide A
86	975-380	Rotary actuator separator
88	975-376	Rotary actuator arm
90	PT-037090	Rotary actuator
92	975-374	Rotary actuator guide B
94	975-396	Rotary actuator guide C

+ Quick View

Automatic inline bottle cleaner with dry or wet cleaning options, model BR-15, Assy 975-700, by Acasi Machinery Inc.

Automatic Inline Bottle Cleaner Model BR15 | Electric Panel Touch

STRUCTURE- TRAY AND COVERS | ELECTRIC PANEL TOUCH

TANK | RINSER SYSTEM | CLAMPING AND TURNING MECHANISM | PROTECTION

975-700 | 975-700-COL V20

+ Quick View

Automatic Inline Bottle Cleaner Model BR15 | Electric Panel Touch (975-700)

STRUCTURE- TRAY AND COVERS | ELECTRIC PANEL TOUCH

TANK | RINSER SYSTEM | CLAMPING AND TURNING MECHANISM | PROTECTION

975-700 | 975-700-COL V20

Item	Part No.	Part Name
2	ELS-422111	Hinges, CFA. 49 B-M5
4	975-702E	Electric panel box
6	WAY-24608	Dome nut 1/2 NPT thread size
8	M1-32912198	Ball stud
10	M1-00483925	Gas Spring
12	975-704E-A	Electric panel door
14	DBR-E5-6-005-UU1	Cam latch
16	AEL-ABB-OHYS2AJ	Selector type handle. Indication I-O
18	DBR-E5-8018	Quad panel latches
20	975-706	Electric panel mounting plate

Item	Part No.	Part Name
22	AEL-53-NP5MQ001B	HMI 5.7" monochrome
24	AEL-A22LTGT110M	Start buttom
26	REX-800FP-MT44	Emergency Stop Push button
28	AEL-53-CP1LL20DRA	Omron PLC for all machine logic functions
30	AEL-EO-XTCE018C10TA	3 Pole FVNR Contactor 18 AMP
32	REX-1606XLP30E	Power Supply 30W
34	AEL-WA-282-124	2-Conductor fuse terminal block with neon lamp
36	AEL-WA-280-901	2-conductor through terminal block
38	AEL-WA-280-907	2-conductor through terminal block (Ground)
40	AEL-WA-859-304	Switching relay terminal block
42	975-714	Steel carrier rail, 35 mm X 7.5 mm X 1mm

Item	Part No.	Part Name
44	AEL-53-MX2AB007	1 HP Speed driver
46	AEL-53-MX2AB004	1/2 HP Speed driver
48	AEL-ABB-S203U-K15	Miniature circuit breaker, 3 poles.
50	PC1-8000-03-02	Breaker plate
52	CAI-10X-09-022	Disconect plate
54	AEL-WA-210-112	Steel carrier rail, 35 mm X 7.5 mm X 1mm
56	ADA-EBM-45A-001A-06	Manifold valve 6 ports

+ Quick View

Automatic Inline Bottle Cleaner Model BR15 | Electric Panel Touch (975-700-COL V20)

STRUCTURE- TRAY AND COVERS | ELECTRIC PANEL TOUCH

TANK | RINSER SYSTEM | CLAMPING AND TURNING MECHANISM | PROTECTION

975-700 | 975-700-COL V20

Item	Part No.	Part Name
2	AEL-53-NP5MQ001B	HMI 5.7" Monochrome
4	REX-800FP-LU2EBFA	2-Function Momentary Button
6	AEL-60-D7P-MT44	Emergency Stop Push Button
8	975-722	Touch Screen Panel Button
10	ELS-422111	Hinges, CFA. 49 B-M5
12	975-702E-COL	Electric Panel Box
14	WAY-24602	Dome Nut, Thread Size: 1/2 NPT
18	M1-32912198	Ball Stud
20	DBR-E5-8018	Cam Latch Grip 1.34

Item	Part No.	Part Name
22	M1-00483925	Gas Spring - ext. Length= 9.6"
24	975-704E-A-COL V20	Electric Panel Door
26	MCM-9600K73	Grommet Fits 0.250 in- 0.063in Thick Panel, 0.344 OD
28	975-752E	Sensor Box
30	975-754	PTFE Gasket
32	AEL-WA-210-112	210-112- Steel Carrier Rail 35mmx 7.5mm x 63.5mm
34	KEYE-FS-V31P	PNP Fiber Optic Amplifier
36	975-706	Electric Panel Mounting Plate
38	AEL-53-CP1LL20DRA	Micro Plc With 20 I/O, Voltage: 100/240 VDC. Inputs 18
40	AEL-EO-XTCE018C10TA	3 Pole FVN30ER Contactor 18 AMP
42	REX-1606XLP3E	Power Supply 30W

Item	Part No.	Part Name
44	AEL-WA-284-124	Closed Fuse Part
46	AEL-WA-210-112-01	Steel Carrier Rail, 35mm X 7.5mm X 1mm
48	AEL-WA-280-901	2- Conductor Terminal Block- 12 AWG
50	AEL-WA-280-907	2- Conductor Through Terminal Block
52	AEL-ABB-OHYS2AJ	Main Switch
54	DBR-E5-6-005-UU1	Cam Latch
56	AEL-WA-859-304	Switching Relay Terminal Block
58	AUT-T1-1015G-1	Wiring duct 1" x 1.5"
60	AEL-53-MX2AB007	1 HP Speed Driver
62	AEL-53-MX2AB004	1/2 HP Speed Driver
64	CAI-10X-09-022	Disconnect Plate
66	PC1-8000-03-02	Breaker Plate
68	AEL-ABB-S203U-K15	Miniature Circuit Breaker, 3 Poles
70	ADA-EBM-45A-001A-06	Manifold Valve 6 Ports

+ Quick View

Automatic Inline Bottle Cleaner Model BR15 | Protection

STRUCTURE- TRAY AND COVERS | ELECTRIC PANEL TOUCH

TANK | RINSER SYSTEM | CLAMPING AND TURNING MECHANISM | PROTECTION

Item	Part No.	Part Name
2	975-II-902B	Protection Support- Right and Back
4	975-II-910-2	Polycarbonate Top Protection R
6	975-II-908	Protection Support - Right and Front
8	975-400	Rear Bottle Pusher HDPE Support
10	975-136	Rear Bottle Pusher Support A
12	975-398	Rear Bottle Pusher Support A-Spacer
14	MCM-9600K25	Grommet fits 0.375 in hole 0.063 in thick panel
16	13070	Cap Delivery Sensor Holder
18	975-912	Protection Support - Left and Back
20	975-920	Ionizing Unit 1 Bracket
22	HPE-IZN10-02P07-B1	Ionizing unit 1

Item	Part No.	Part Name
24	975-956	Sensor Holder Support
26	975-952E	Sensor Holder Support Welded
28	975-906-B	Support Head Flush Bracket
30	M1-06172373	Clamping Knob, Stem 0.75in, Thread 10-32
32	975-916	Polycarbonate Top Protection L
34	975-950	Sliding Piece
36	975-924	Cylinder Dual Rod HDPE Support
38	975-910	Protection Support- Left and Front
40	CXSM20-50	Cylinder Dual Rod
42	975-922	Gating L 1
44	975-390	Base Bottle Pusher Holder
46	975-918	Protection Support Windows
48	975-386	Guide Cylinder DFM Support
50	975-342	Polyurethane Bottle Pusher Holder

+ Quick View

Automatic Inline Bottle Cleaner Model BR15 | TANK

STRUCTURE- TRAY AND COVERS | ELECTRIC PANEL TOUCH

TANK | RINSER SYSTEM | CLAMPING AND TURNING MECHANISM | PROTECTION

975-500 | 975-620

+ Quick View

Automatic inline bottle cleaner with dry or wet cleaning options, model BR-15, Assy 975-500, by Acasi Machinery Inc.

Automatic Inline Bottle Cleaner Model BR15 | TANK (975-500)

STRUCTURE- TRAY AND COVERS | ELECTRIC PANEL TOUCH

TANK | RINSER SYSTEM | CLAMPING AND TURNING MECHANISM | PROTECTION

975-500 | 975-620

Item	Part No.	Part Name
2	M1-82504721	Straight handle of 5in
4	975-506	Return tank cover
6	975-506E	Tank and structure welded
8	BAR-AC5STS1V400B015C	1 HP 96 GPM centrifugal pump
10	AME-HNX-08	Hexagon nut 0.500-13
12	975-512	BR isolate cover C
14	SS-03PYP-125-SW-TS13-01	Polyurethane wheel with ST/ST swivel base
16	975-514	BR isolate cover D

Item	Part No.	Part Name
18	975-508	BR isolate cover A
20	WAY-24602	Dome nut 1/2 NPT thread size
22	AMA-B000BPG4LI	240V Ripple Water Heater Element
24	975-516	BR isolate cover B
26	975-510	BR tank plastic cap
28	JUI-FERRULE-1.5"	Ferrul 1.5in x 2in long
30	JUI-CLAMP-1.5	Sanitary clamp 1.5 in

+ Quick View

Automatic Inline Bottle Cleaner Model BR15 | TANK (975-620)

STRUCTURE- TRAY AND COVERS | ELECTRIC PANEL TOUCH

TANK | RINSER SYSTEM | CLAMPING AND TURNING MECHANISM | PROTECTION

975-500 | 975-620

Item	Part No.	Part Name
2	ELS-37101	Straight Handle of 5in
4	AEL-BN-73156	QS18U: Ultrasonic Range: 50-500 mm; Input: 12-30 V dc
6	975-550E	Sensor Support
8	975-608	Return Tank Cover
10	50CNFHS	1/2-13 Hex Finish With ST/ST Swivel Base
12	975-600E	Tank and Structure Welded
14	SS-03PY-125-SW-TS13-01	Polyurethane Wheel With ST/ST Swivel Base
16	MIA-5483-98	1 HP Centrifugal Pump
18	975-ANG-520E	Polyurethane Wheel Support