Products

PRESSURE OVERFLOW STANDARD NOZZLE 

Sizes availables:

0.250in | 0.375in | 0.500in | 0.625in | 0.750in | 1.000in | 1.250in

Item	Part No.	Part Name	Price
2	NOF-0.375-01-023	Washer, ID 0.406in, OD 1.250in
4	NOF-COM-01-004E	Nozzle feed...............
6	NOF-COM-01-006	Teflon washer
8	NOF-1.000-01-012E-01 V16	Fill tube assembly
10	ASS-C1100-085-3000-S	Compression spring, wire 0.085, OD 1.100in lenght 3in
12	M1-35462829	Two-Piece Clamp-on Shaft Collar; ID: 0.8750 in
14	M1-09267105	Oring Viton Dash number 210, ID:0,750", OD:1.000"

Item	Part No.	Part Name	Price
16	NOF-1.000-01-014E-01-V16	Return Tube Assembly
18	NOF-1.000-01-017	Nozzle  Spacer 1.000in
20	NOF-1.000-01-020	Nozzle Spacer 0.375in
22	NOF-1.000-01-022	Nozzle Spacer 0.125in
24	NOF-1.000-01-023	1.000 Nozzle bottom washer
26	NOF-1.000-01-024	1.000 Nozzle Fill Pressure rubber
28	M1-09266156	O-Ring, Dash Number 115, ID 0.6875 in, OD 0.875 in
30	NOF-1.000-01-026	Nozzle tip

PRESSURE OVERFLOW SANITARY NOZZLE 

Sizes availables:

0.375in  |  0.500in  |  0.625in  |  0.750in  |  1.000in

Item	Part No.	Part Name	Price
2	NOF-0.375-01-023	Washer, ID 0.406in, OD 1.250in
4	NOF-COM-01-004E-SAN	Nozzle feed
6	NOF-COM-01-006	Teflon washer
8	NOF-0.750-01-012E	Fill tube assembly
10	ASS-C0975-074-2500-S	Compression spring, wire 0.074, OD 0.975in Free length 2.5in
12	NOF-0.750-01-008	Stainless steel washer
14	M1-09266164	O-Ring viton PR-116
16	NOF-0.750-01-010	O-Ring base washer

Item	Part No.	Part Name	Price
18	NOF-0.750-SAN-014E	Return tube assembly
20	JUI-FERRULLE-.75"	Long Weld Ferrule Size 0.75 in
22	JUI-CLAMP-0.50	0.50 in Sanitary Clamp
24	JUI-GASKET-EPDM-0.75"	Seal 0.75in
26	NOF-0.750-01-017	Nozzle spacer 1in
28	NOF-0.750-01-020	Nozzle spacer 0.25in
30	NOF-0.750-01-022	Nozzle spacer 0.125in
32	NOF-0.750-01-023	0.750 nozzle bottom washer
34	NOF-0.750-01-024	0.750 nozzle fill pressure rubber
36	M1-09266123	O-Ring viton PR-112
38	NOF-0.750-01-026	0.750 nozzle tip

Nozzles

Pressure overflow sanitary nozzles manufactured in 316L stainless steel comes standard with Viton o-rings, Teflon seals, black nylon spacers and soft polyurethane bottle to nozzle seal. The product supply and return connection is of sanitary type, using ferrules.

Sizes available: 

• 3/4 inch. | 5/8 inch.  | 1/2 inch.  | 3/8 inch.

• 1" Pressure overflow nozzles manufactured in 316L.

Nozzles

Pressure overflow sanitary nozzles manufactured in 316L stainless steel comes standard with Viton o-rings, Teflon seals, black nylon spacers and soft polyurethane bottle to nozzle seal. The product supply and return connection is of sanitary type, using ferrules.

Sizes available: 

• 3/4 inch. | 5/8 inch.  | 1/2 inch.  | 3/8 inch.

• 1" Pressure overflow nozzles manufactured in 316L.

Nozzles

Pressure overflow nozzles manufactured in 316L stainless steel comes standard with Viton o-rings, Teflon seals, black nylon spacers and soft polyurethane bottle to nozzle seal.

Sizes available: 

• 3/4 inch. | 5/8 inch.  | 1/2 inch.  | 3/8 inch.  | 1/4 inch.

• 1" Pressure overflow nozzles manufactured in 316L.

• 1 ¼” Pressure Overflow Nozzle manufactured in 316L.

T Cork Push Capper on PC1-8000

Model PC1-8000-TC

• Machine designed to place T cork caps on a wide range of containers – enclosures.
• Price includes one set of change parts (star wheel, outer guide, cap delivery).
• Fully adjustable from 7 inch to 14 inch high containers. (Special configurations available on request).
• Center CAM manufactured in special cam rated casting.
• Cap delivery to transfer plate only when bottles are present.
• Price includes one set of chance parts (In feed screw and star wheels).
• 2 Hp Ac motor with frequency drive speed control.
• Stainless steel electric enclosure.
• Heavy duty 304 Stainless steel welded frame.
• Stainless steel enclosure with polycarbonate windows and safety switches.
• All shafts from ¼ to 2.5 inches manufactured in 304 stainless steel.
• Gear driven transmission machine to avoid timing loss.
• Complete height adjustment with bottle setting guide for quick changeovers.
• Tool-less changeovers for star wheels and most change parts. 
• All electric, pneaumatic and mechanical components are off the shelf and commercially available.

Cap chute features:

• All contact parts in stainless steel.
• Designed and tested for each cap to avoid jamming.
• Includes cap demand sensor to start and stop the cap feeder.
• Quick change over, since parts are pin guided so no tweaking is required. 

• Speed control by potentiometer 220 Volts, 60Hz, 10 Amps.
• 5 CFM @ 80 psi.

Includes one set of change of parts

Includes one set of change of parts

ACASI single head ROPP bottle capper with vibratory feeder model ROP1-VIB

Capper features:
• Machine designed to place and form metal caps on a wide range of containers – enclosures.
• Price includes one set of change of parts (star wheel, outer guide and cap delivery).
• Acasi ROPP capping head model VA90, manufactured in 304 stainless steel and hardened forming discs.
• Bottle will pick up cap and the container will be indexed into position.
• Fully adjustable from 7 inch to 14 inch high containers. (Special configurations available on request).
• Maximum bottle diameter with 12 pocket star wheel: 4.25 in
• Maximum bottle diameter with 6 pocket star wheel: 8.00 in
• Center CAM manufactured in special cam rated plastic material.
• Automatic start and stop with presence or absence of containers.
• 12 or 6 pocket center star wheel for container handling (Depends on the size of the container).
• Jamming clutches with electric signal for shutdown on product jamming (This prevents major damage to parts and minimizes possible spills).
• 2 Hp Ac motor with frequency drive speed control
• Stainless steel electric enclosure.
• Heavy duty 304 Stainless steel welded frame.
• Stainless steel enclosure with polycarbonate windows and safety switches.
• All shafts from ¼ to 2.5 inches are manufactured in 304 stainless steel.
• Gear driven transmission machine to avoid timing loss.
• Complete height adjustment with bottle setting guide for quick changeovers.
• Tool less changeovers for star wheels and most change parts.

Cap chute features:
• All contact parts in stainless steel.
• Designed and tested for each cap to avoid jamming.
• Includes cap demand sensor to start and stop the cap feeder.
• Quick change over, since parts are pin guided so no tweaking is required.

Vibratory cap feeder features:
• Aluminum casting with polyurethane liner to minimizes cap marking-scratching
• 24 inch diameter feeding disc - ramp assembly.
• Bad caps rejected mechanically, minimum air usage.
• Cap by demand controlled by photoelectric sensor.
• Bowl tooled for one model cap.
• Adjustable vibration and speed control
• Heavy duty extra heavy base for better vibration transmission.
• Sorter mounted on machine, no need for independent height adjustment.
• Includes filter pressure regulator.
• Flow controls on all air hoses.

Electric and pneumatic requirements:
• 220 Volts, 60Hz, 10 Amps.
• 5 CFM @ 80psi

Floor level cap feeder, features:
• 4.5 Cubic feet stainless steel hopper.
• 8 inch wide belt.
• Cleated belts, 6 inch spacing, 2 inch cleats.
• L shape conveyor for vertical and horizontal transportation of caps.
• Swivel to facilitate change over on centrifugal bowl.
• Speed control.