Products

IBSO BOTTOM UP SANITARY NOZZLE

Sizes availables:

0.375in | 0.500in | 0.625in | 0.750in

Item	Part No.	Part Name	Price
2	ADA-PC-041-D	1" Stroke cylinder 3/4" bore
4	NPC-COM-01-004	Support of filling tips
6	NOZ-IBSO-0.625-07-002E	Joint entrance tube
8	NOZ-IBSO-0.625-01-005	Lock nut
10	M1-09265125	Viton O-Ring, dash number 012
12	NOZ-IBSO-0.625-01-006	Stem
14	M1-09265109	Viton O-Ring, dash number 010
16	M1-09266156	Viton O-Ring, dash number 115
18	NOZ-IBSO-0.625-01-004E	Tube spout assemble
20	JUI-GASKET-EPDM-0.7"	Seal 0.75in
22	JUI-CLAMP-0.50"	0.5 in sanitary clamp
24	JUI-FERRULE-.75"	Stainless steel long weld ferrule Size 0.750 in

STANDARD IBSO NOZZLE 

Sizes availables:

0.250in | 0.375in | 0.500in | 0.625in | 0.750in | 1.000in | 1.250in | 1.500in

Item	Part No.	Part Name	Price
2	ADA-PC-041-D	Bimba cylinder, Bore size: 3/4", Standard stroke lengths: 1",Mounting: Nose mount
4	NPC-COM-01-004	Support of filling tips
6	NOZ-IBSO-0.625-01-002E	Joint entrance tube
8	M1-09265125	O-Ring PR-012
10	NOZ-IBSO-0.625-01-005	Lock nut
12	NOZ-IBSO-0.375-02-006	Standard size stem.
14	M1-09265059	O-Rings; Cross Section Shape: Round; Material: Viton; Dash Number: 005
16	M1-09266156	O-Ring de viton PR-115-VI
18	NOZ-IBSO-0.375-02-004E	Tube spout assemble

STANDARD IBSO NOZZLE 

Sizes availables:

0.250in | 0.375in | 0.500in | 0.625in | 0.750in | 1.000in | 1.250in | 1.500in

Item	Part No.	Part Name	Price
2	ADA-PC-041-D	Bimba cylinder, Bore size: 3/4", Standard stroke lengths: 1",Mounting: Nose mount
4	NPC-COM-01-004	Support of filling tips
6	NOZ-IBSO-0.625-01-002E	Joint entrance tube
8	NOZ-IBSO-0.625-01-005	Lock nut
10	M1-09265125	O-Ring PR-012
12	NOZ-IBSO-0.750-02-006	Stem
14	M1-09265117	O-Ring PR-011
16	M1-09266156	O-Ring de viton PR-115-VI
18	NOZ-IBSO-0.750-02-004E	Tube spout assemble

STANDARD IBSO NOZZLE 

Sizes availables:

0.250in | 0.375in | 0.500in | 0.625in | 0.750in | 1.000in | 1.250in | 1.500in

Item	Part No.	Part Name	Price
1	ADA-CPLS250-1/8	Swivel male elbow 0.125NPT x 0.25in OD
2	PC-171-D	Air cylinder, bore size 1.50in, stroke 1.00in
3	ADA-CPBR250-1/8	Straight Male Connector, 1/8" NPT, OD: 1/4"
4	NOZ-IBSO-1.250-01-100	Support of filling tips
6	NOZ-IBSO-1.250-02	Joint entrance tube
8	NOZ-IBSO-1.250-01-005	Lock nut
10	M1-09261132	O-Ring dash number 113
12	NOZ-IBSO-1.500-01-006	Stem
14	PIS-0.075-01-008	PTFE 2.5-Oz bottom piston washer
16	M1-09261157	O-Ring dash number 115
18	NOZ-IBSO-1.500-02-004E	Tube spout assemble

IBSO SANITARY NOZZLE 

Sizes availables:

0.375in | 0.500in | 0.625in | 0.750in

Item	Part No.	Part Name	Price
2	ADA-PC-041-D	Bimba cylinder, Bore size: 3/4", Standard stroke lengths: 1",Mounting: Nose mount
4	NPC-COM-01-004	Support of filling tips
6	NOZ-IBSO-0.625-07-002E	Joint entrance tube
8	NOZ-IBSO-0.625-01-005	Lock nut
10	M1-09265125	Viton O-Ring, dash number 012
12	NOZ-IBSO-0.375-02-006	Stem
14	M1-09265059	Viton O-Ring, dash number 005
16	M1-09266156	Viton O-Ring, dash number 115
18	NOZ-IBSO-0.375-02-004E	Tube spout assemble
20	JUI-GASKET-EPDM-0.7"	Seal 0.75in
22	JUI-CLAMP-0.50"	0.5 in sanitary clamp
24	JUI-FERRULE-.75"	Stainless steel long weld ferrule Size 0.750 in

IBSO SANITARY NOZZLE 

Sizes availables:

0.375in | 0.500in | 0.625in | 0.750in

Item	Part No.	Part Name	Price
2	ADA-PC-041-D	Bimba cylinder, Bore size: 3/4", Standard stroke lengths: 1",Mounting: Nose mount
4	NPC-COM-01-004	Support of filling tips
6	NOZ-IBSO-0.625-07-002E	Joint entrance tube
8	NOZ-IBSO-0.625-01-005	Lock nut
10	M1-09265125	Viton O-Ring, dash number 012
12	NOZ-IBSO-0.750-02-006	Stem
14	M1-09265117	Viton O-Ring, dash number 011
16	M1-09266156	Viton O-Ring, dash number 115
18	NOZ-IBSO-0.750-02-004E	Tube spout assemble
20	JUI-GASKET-EPDM-0.7"	Seal 0.75in
22	JUI-CLAMP-0.50"	0.5 in sanitary clamp
24	JUI-FERRULE-.75"	Stainless steel long weld ferrule Size 0.750 in

 PISTON & VALVE SYSTEM | TUBE STRUCTURE & CHASSIS 

 SERVO NOZZLE MOVEMENT | ELECTRIC PANEL TOUCH |

 STANDARD TANK | TANK HEATED-AGITATION |

 TANK WITH BLENDER TROWEL

Sizes  availables:

ID 7/8in | ID 1-1/8in |  ID 1-3/8in | ID 1-7/8in | ID 2-7/8in | ID 4-1/4in  | ID 5-1/4in | OD 2in U-Cap | OD 3in U-Cap

Item	Part No.	Part name	Price
2	M1-75748442	O-Ring, Dash 142, ID 2.375 in, OD 2.563in
4	618-320E	Piston main body
6	M1-09263252	O-Ring, Dash Number 325, ID 1.50 in, OD 1.875 in
8	618-220	Seal rod for trupiston
10	ANSI B18.2.2 - 3/4 - 16	Hexagon nut 0.750-16
12	615-210	Piston acting shaft

PISTON & VALVE SYSTEM | TUBE STRUCTURE & CHASSIS 

SERVO NOZZLE MOVEMENT | ELECTRIC PANEL TOUCH |

STANDARD TANK | TANK HEATED-AGITATION |

TANK WITH BLENDER TROWEL

Sizes  availables:

ID 7/8in | ID 1-1/8in | ID 1-3/8in | ID 1-7/8in | ID 2-7/8in | ID 4-1/4in  | ID 5-1/4in | OD 2in U-Cap | OD 3in U-Cap

Item	Part No.	Part name	Price
2	M1-75748442	O-Ring, Dash Number 142, ID 2.375 in, OD 2.563 in
4	619-320E	4.00in piston assy
6	M1-75749614	O-Ring, Dash Number 341, ID 3.500 in, OD 3.938 in
8	619-220	Seal rod for trupiston
10	ANSI B18.2.2 - 3/4 - 16	Hexagon nut 0.750-16
12	615-210	Piston acting shaft

• Heavy duty 304 Stainless steel welded C frame for easy mounting in existing conveyors.
• Heavy duty linear carriage system for height adjustability.
• All shafts and threaded rods manufactured in 304 stainless steel.
• Heavy duty casters standard.
• No change of parts needed for a wide range of containers.
• Front and back covers with safety interlock standard.
• Top driven to insure no product spillage into drive assembly.
• Fully adjustable from 1 inch to 14 inch high containers. (Optional electrical height adjustment).

Capping discs features:

• Available configuration of 4, 6 and 8  capping discs.
• Independent spring loaded capping discs for better torque and mis-alignment forgiveness.
• Adjustability of torque while the machine is running.
• Clutches located away from capping discs to avoid corrosion.
• Heavy duty gear driven mechanism, no belts used for power transmission.
• Mechanical or pneumatic clutches available.
• Adjustable speed ½ Hp 3 phase for 4 and 6 capping discs, 1 Hp 3 phase 8 capping discs.
• Optional separate motor for first capping disc set opposite rotation direction.
• Most bearings protected by seals.
• Capping assembly manufactured in 316L stainless steel.
• All parts manufactured in stainless steel or strong FDA approved plastic materials.
• Independent front or back capping discs adjustability.
• Adjustability of capping discs position while the machine is running without opening the safety covers.
• Fully adjustable for caps from 8 mm to 130 mm.

Bottle belts features:

• Bottle belts width adjusted through front knobs.
• Bottle belts height adjusted via front knobs.
• Heavy duty gear driven mechanism, no belts used for power transmission.
• Adjustable speed heavy duty 1 Hp, 3 phase motor gearbox.
• Each belt has additional independent width adjustability to be able to hold the container in different widths.
• Double belt with independent height adjustability (Optional).
• Independent spring loaded capping discs for better torque and mis-alignment forgiveness.
• Bottle belts angle adjustability for tapered bottles.

Electric and pneumatic requirements:

• 208 - 240 Volts, Single phase, 50/60Hz, 15 Amps.
• 5 CFM @ 80 p.s.i. (Only with pneumatic clutches)

Tightener Features: 

• Heavy duty 304 Stainless steel welded C frame for easy mounting in existing conveyors.
• Heavy duty linear carriage system for height adjustability.
• All shafts and threaded rods manufactured in 304 stainless steel.
• Heavy duty casters standard.
• No change of parts needed for a wide range of containers.
• Front and back covers with safety interlock standard.
• Top driven to insure no product spillage into drive assembly.
• Fully adjustable from 1 inch to 14 inch high containers. (Optional electrical height adjustment).

Capping discs features:

• Available configuration of 4, 6 and 8  capping discs.
• Independent spring loaded capping discs for better torque and mis-alignment forgiveness.
• Adjustability of torque while the machine is running.
• Clutches located away from capping discs to avoid corrosion.
• Heavy duty gear driven mechanism, no belts used for power transmission.
• Mechanical or pneumatic clutches available.
• Adjustable speed ½ Hp 3 phase for 4 and 6 capping discs, 1 Hp 3 phase 8 capping discs.
• Optional separate motor for first capping disc set opposite rotation direction.
• Most bearings protected by seals.
• Capping assembly manufactured in 316L stainless steel.
• All parts manufactured in stainless steel or strong FDA approved plastic materials.
• Independent front or back capping discs adjustability.
• Adjustability of capping discs position while the machine is running without opening the safety covers.
• Fully adjustable for caps from 8 mm to 130 mm.

Bottle belts features:

• Bottle belts width adjusted through front knobs.
• Bottle belts height adjusted via front knobs.
• Heavy duty gear driven mechanism, no belts used for power transmission.
• Adjustable speed heavy duty 1 Hp, 3 phase motor gearbox.
• Each belt has additional independent width adjustability to be able to hold the container in different widths.
• Double belt with independent height adjustability (Optional).
• Independent spring loaded capping discs for better torque and mis-alignment forgiveness.
• Bottle belts angle adjustability for tapered bottles.

Electric and pneumatic requirements:

• 208 - 240 Volts, Single phase, 50/60Hz, 15 Amps.
• 5 CFM @ 80 p.s.i. (Only with pneumatic clutches)