Products

Tightener Features: 

• Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
• Heavy duty linear carriage system for height adjustability
• All shafts and threaded rods manufactured in 304 stainless steel.
• Heavy duty casters standard
• No change of parts needed for a wide range of containers
• Front and back covers with safety interlock switches standard
• Top driven to insure no product spillage into drive assembly
• Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment).

• 4, 6, or 8 spindle configurations available, single gear box driven
• Independent spring loaded capping discs for better torque and misalignment forgiveness.
• Torque is able to be adjusted while the machine is running
• Clutches located away from capping discs to avoid corrosion
• Heavy duty gear driven mechanism, no belts used for power transmission
• Mechanical clutch assemblies standard (Optional pneumatic clutch upgrade available)
• Adjustable speed 1 Hp 3 phase drive motor for capping discs
• Optional second drive motor to rotate the first set of capping discs on the opposite direction
• Most bearings protected by seals
• Capping head assembly manufactured in 316L stainless steel
• All parts manufactured in stainless steel, or FDA approved polymer materials
• Independent adjustment for front or back capping discs
• Capping disc position is adjustable while the machine is running, without opening the safety covers.
• Fully adjustable for caps sizes ranging from 8 mm to 130 mm in diameter.

• Bottle belt width adjusted via front knobs
• Bottle belt height adjusted via front knobs
• Heavy duty gear drive mechanism, no belts used for power transmission.
• Adjustable speed heavy duty 1 Hp, 3 phase motor gearbox
• Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers.
• Optional double belt assembly with independent height and angle adjustment.

• 208 - 240 Volts, Single phase, 50/60Hz, 15 Amps.
• 5 CFM @ 80 p.s.i. 

• Construction in stainless steel.
• 32 inch diameter feeding disc - ramp assembly.
• Cap rejecting by photoelectric sensor.
• Cap by demand controlled by photoelectric sensor.
• Standard 4 pieces slotted cross for easy tooling adjustment.
• Easy changeover for caps from 10mm to 90mm in diameter.
• Easy changeover for caps from 0.125 to 2.5 inches in height.
• Sorter mounted on machine, no need for independent height adjustment.
• Includes filter pressure regulator.
• Flow controls on all air hoses.
• Adjustable vibration system on cap hopper.
• Force provided by 1/3 Hp DC gear motor.
• Speed control by potentiometer.

•  3 Cubic feet stainless steel deposit.
•  Vibrator with independent control mounted on cap hopper. 
•  Low friction limit switch for cap level sensing on centrifugal cap feeder.

• Upgrade of each set of clutches 
• Double belt assembly, independent belt, height adjustable 
• Power height adjustment upgrade 
• Additional drive motor to reverse the first set of spindles 
• Class 1 Division 1 Explosion Proofing 
• Spacing wheel assembly to control bottle feed into machine 
• Bottle reject system, with laser sensor for uncapped containers or cross threaded caps. Includes dump table. 
• Pressure cap wheel 
• Nylon U Channel for spray and pump tightening 
• Cap alternating system 
• 10 Ft. Conveyor, acetyl chain, 4.5 in. wide, speed control installed in conveyor 
• Each additional foot up to a maximum conveyor length of 20 feet 
• Each additional foot of guide rails 

ACASI Inline Cap Tightener Model CAI-10X

• Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors 
• Heavy duty linear carriage system for height adjustability
• All shafts and threaded rods manufactured in 304 stainless steel
• Heavy duty casters standard
• No change of parts needed for a wide range of containers
• Front and back covers with safety interlock switches standard
• Top driven to insure no product spillage into drive assembly
• Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment)

Capping discs features:

• 4, 6 or 8 spindle configurations available, single gear box driven
• Independent spring loaded capping discs for better torque and misalignment forgiveness
• Torque is able to be adjusted while the machine is running
• Clutches located away from capping discs to avoid corrosion
• Heavy duty gear driven mechanism; no belts used for power transmission
• Mechanical clutch assemblies standard (Optional pneumatic clutch upgrade available)
• Adjustable speed 1 Hp 3 phase drive motor for capping discs
• Optional second drive motor to rotate the first set of capping discs on the opposite direction 
• Most bearings protected by seals
• Capping head assembly manufactured in 316L stainless steal
• All parts manufactured in stainless steel or FDA approved polymer materials
• Independent adjustment for front or back capping discs
• Capping disc position is adjustable while the machine is running, without opening the safety covers
• Fully adjustable for cap sizes ranging from 8 mm to 130 mm in diameter

Bottle belt features:

• Bottle belt width adjusted via front knobs
• Bottle belt height adjusted via front knobs
• Heavy duty gear drive mechanism; no belts used for power transmission
• Adjustable speed heavy duty 1 Hp 3 phase motor gearbox
• Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers
• Optional double belt assembly with independent height and angle adjustment

Electric and pnuematic requirements:

• 208 - 240 Volts, Single phase, 50/60Hz, 15 Amps
• 5 CFM @ 80 p.s.i.

ACASI Cap Feeder Model CF-4400

Features:

• Construction in stainless steel
• 18 inches wide belt
• Cap feeder is adjustable for caps from 8mm to 110mm in diameter via quick adjust knobs
• Caps feed on demand; controlled by photoelectric sensor 
• Air shutoff valve controlled by photoelectric sensor
• Includes air regulator and filter
• Feeder inclination adjustable from 0 to 5 degrees
• Complete height adjustment by structure 1 inch bolts and/or cap delivery system
• 10 cubic feet cap hopper
• Drive provided by DC gear motor
• Independent Speed Control (potentiometer)

• Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors.
• Heavy duty linear carriage system for height adjustability
• All shafts and threaded rods manufactured in 304 stainless steel
• Heavy duty casters standard
• No change of parts needed for a wide range of containers
• Front covers with safety interlock switches standard
• Top driven to insure no product spillage into drive assembly
• Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment)

• 4, 6, or 8 spindle machine configurations available, single gear box driven
• Independent spring loaded capping discs for better torque and misalignment forgiveness.
•  Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased)
•  Clutches located away from capping discs to avoid corrosion
•  Heavy duty gear driven mechanism, no belts used for power transmission
•  Adjustable speed 1/2 Hp drive motor for bottle capping discs
•  Optional second drive motor to rotate the first set of capping discs on the opposite direction
• Bottle capping head assembly manufactured in 316L stainless steel 95% of manufactured parts are in stainless steel, or FDA approved polymer materials
•  Independent adjustment for front or back capping discs
• Bottle capping disc position is adjustable while the machine is running, without opening the safety covers.
•  Fully adjustable for caps sizes ranging from 8 mm to 130 mm in diameter

• Bottle belt width adjusted via front knobs
• Bottle belt height adjusted via front knobs
• Heavy duty gear drive mechanism, no belts used for power transmission.
• Adjustable speed heavy duty 1/2 Hp, motor gearbox
• Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers.
• Optional double belt assembly with independent height and angle adjustment

• Construction in stainless steel.
• 32 inch diameter feeding disc ‐ ramp assembly.
• Cap rejecting by photoelectric sensor.
• Cap by demand controlled by photoelectric sensor.
• Standard 4 pieces slotted cross for easy tooling adjustment.
• Easy changeover for caps from 10mm to 90mm in diameter.
• Easy changeover for caps from 0.125 to 2.5 inches in height.
• Sorter mounted on machine, no need for independent height adjustment.
• Includes filter pressure regulator.
• Flow controls on all air hoses.
• Adjustable vibration system on cap hopper.
• Force provided by 1/3 Hp DC gear motor.
• Speed control by potentiometer.

• 3 Cubic feet stainless steel deposit.
• Vibrator with independent control mounted on cap hopper.
• Low friction limit switch for cap level sensing on centrifugal cap feeder.

• 110 Volts, Single phase, 50/60Hz, 15 Amps.
• 10 CFM @ 80 p.s.i.

Tightener Features:  

• Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors.
• Heavy duty linear carriage system for height adjustability
• All shafts and threaded rods manufactured in 304 stainless steel
• Heavy duty casters standard
• No change of parts needed for a wide range of containers
• Front covers with safety interlock switches standard
• Top driven to insure no product spillage into drive assembly
• Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment)

• 4, 6, or 8 spindle machine configurations available, single gear box driven
• Independent spring loaded capping discs for better torque and misalignment forgiveness.
•  Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased)
•  Clutches located away from capping discs to avoid corrosion
•  Heavy duty gear driven mechanism, no belts used for power transmission
•  Adjustable speed 1/2 Hp drive motor for bottle capping discs
•  Optional second drive motor to rotate the first set of capping discs on the opposite direction
• Bottle capping head assembly manufactured in 316L stainless steel 95% of manufactured parts are in stainless steel, or FDA approved polymer materials
•  Independent adjustment for front or back capping discs
• Bottle capping disc position is adjustable while the machine is running, without opening the safety covers.
•  Fully adjustable for caps sizes ranging from 8 mm to 130 mm in diameter

• Bottle belt width adjusted via front knobs
• Bottle belt height adjusted via front knobs
• Heavy duty gear drive mechanism, no belts used for power transmission.
• Adjustable speed heavy duty 1/2 Hp, motor gearbox
• Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers.
• Optional double belt assembly with independent height and angle adjustment

• Construction in stainless steel.
• 32 inch diameter feeding disc ‐ ramp assembly.
• Cap rejecting by photoelectric sensor.
• Cap by demand controlled by photoelectric sensor.
• Standard 4 pieces slotted cross for easy tooling adjustment.
• Easy changeover for caps from 10mm to 90mm in diameter.
• Easy changeover for caps from 0.125 to 2.5 inches in height.
• Sorter mounted on machine, no need for independent height adjustment.
• Includes filter pressure regulator.
• Flow controls on all air hoses.
• Adjustable vibration system on cap hopper.
• Force provided by 1/3 Hp DC gear motor.
• Speed control by potentiometer.

• 3 Cubic feet stainless steel deposit.
• Vibrator with independent control mounted on cap hopper.
• Low friction limit switch for cap level sensing on centrifugal cap feeder.

• 220 Volts, Single phase, 50/60Hz, 15 Amps.
• 10 CFM @ 80 p.s.i.

Tightener Features:

• Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors.
• Heavy duty linear carriage system for height adjustability
• All shafts and threaded rods manufactured in 304 stainless steel
• Heavy duty casters standard
• No change of parts needed for a wide range of containers
• Front covers with safety interlock switches standard
• Top driven to insure no product spillage into drive assembly
• Adjustable height to accommodate containers from 1 inch to14 inches tall (Optional power height adjustment).

Capping discs features:

• 4, 6, or 8 spindle machine configurations available, single gear box driven
• Independent spring loaded bottle capping discs for better torque and misalignment forgiveness. 
• Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased) 
• Clutches located away from capping discs to avoid corrosion
• Heavy duty gear driven mechanism, no belts used for power transmission
• Adjustable speed 1/2 Hp drive motor for bottle capping discs
• Optional second drive motor to rotate the first set of capping discs on the opposite direction
• Capping head assembly manufactured in 316L stainless steel 95% of manufactured parts are in stainless steel, or FDA approved polymer materials
• Independent adjustment for front or back capping discs
• Capping disc position is adjustable while the machine is running, without opening the safety covers.
• Fully adjustable for bottle cap sizes ranging from 8 mm to 130 mm in diameter

Bottle belts features:

• Bottle belt width adjusted via front knobs
• Bottle belt height adjusted via front knobs
• Heavy duty gear drive mechanism, no belts used for power transmission.
• Adjustable speed heavy duty 1/2 Hp, motor gearbox
• Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers. 
• Optional double belt assembly with independent height and angle adjustment

Waterfall feeder features:

• Construction in stainless steel
• 18 inch wide belt
• Cap feeder is adjustable for bottle caps from 8mm to 110mm in diameter, via quick adjust knobs
• Caps feed on demand, controlled by photoelectric sensor
• Air shutoff valve controlled by photoelectric sensor
• Includes air regulator and filter
• Feeder inclination adjustable from 0 to 5 degrees
• Complete height adjustment by structure 1 inch bolts and/or cap delivery system.
• 10 cubic foot cap hopper
• Drive provided by DC gear motor.
• Independent Speed Control (potentiometer)

Electric and pneumatic requirements:

• 220 Volts, Single phase, 50/60Hz, 15 Amps.
• 10 CFM @ 80 p.s.i.

Tightener Features:

• Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors.
• Heavy duty linear carriage system for height adjustability
• All shafts and threaded rods manufactured in 304 stainless steel
• Heavy duty casters standard
• No change of parts needed for a wide range of containers
• Front covers with safety interlock switches standard
• Top driven to insure no product spillage into drive assembly
• Adjustable height to accommodate containers from 1 inch to14 inches tall (Optional power height adjustment).

Capping discs features:

• 4, 6, or 8 spindle machine configurations available, single gear box driven
• Independent spring loaded bottle capping discs for better torque and misalignment forgiveness. 
• Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased) 
• Clutches located away from capping discs to avoid corrosion
• Heavy duty gear driven mechanism, no belts used for power transmission
• Adjustable speed 1/2 Hp drive motor for bottle capping discs
• Optional second drive motor to rotate the first set of capping discs on the opposite direction
• Capping head assembly manufactured in 316L stainless steel 95% of manufactured parts are in stainless steel, or FDA approved polymer materials
• Independent adjustment for front or back capping discs
• Capping disc position is adjustable while the machine is running, without opening the safety covers.
• Fully adjustable for bottle cap sizes ranging from 8 mm to 130 mm in diameter

Bottle belts features:

• Bottle belt width adjusted via front knobs
• Bottle belt height adjusted via front knobs
• Heavy duty gear drive mechanism, no belts used for power transmission.
• Adjustable speed heavy duty 1/2 Hp, motor gearbox
• Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers. 
• Optional double belt assembly with independent height and angle adjustment

Waterfall feeder features:

• Construction in stainless steel
• 18 inch wide belt
• Cap feeder is adjustable for bottle caps from 8mm to 110mm in diameter, via quick adjust knobs
• Caps feed on demand, controlled by photoelectric sensor
• Air shutoff valve controlled by photoelectric sensor
• Includes air regulator and filter
• Feeder inclination adjustable from 0 to 5 degrees
• Complete height adjustment by structure 1 inch bolts and/or cap delivery system.
• 10 cubic foot cap hopper
• Drive provided by DC gear motor.
• Independent Speed Control (potentiometer)

Vertical cap placement features:

• Construction in stainless steel and aluminum
• Caps feed on demand, controlled by photoelectric sensor
• Powered by 750W AC Servo motor
• Bottle handling using pneumatic cylinders

Electric and pneumatic requirements:

• 220 Volts, Single phase, 50/60Hz, 15 Amps.
• 10 CFM @ 80 p.s.i.

Tightener Features:

• Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors.
• Heavy duty linear carriage system for height adjustability
• All shafts and threaded rods manufactured in 304 stainless steel
• Heavy duty casters standard
• No change of parts needed for a wide range of containers
• Front covers with safety interlock switches standard
• Top driven to insure no product spillage into drive assembly
• Adjustable height to accommodate containers from 1 inch to14 inches tall (Optional power height adjustment).

Capping discs features:

• 4, 6, or 8 spindle machine configurations available, single gear box driven
• Independent spring loaded bottle capping discs for better torque and misalignment forgiveness. 
• Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased) 
• Clutches located away from capping discs to avoid corrosion
• Heavy duty gear driven mechanism, no belts used for power transmission
• Adjustable speed 1/2 Hp drive motor for bottle capping discs
• Optional second drive motor to rotate the first set of capping discs on the opposite direction
• Capping head assembly manufactured in 316L stainless steel 95% of manufactured parts are in stainless steel, or FDA approved polymer materials
• Independent adjustment for front or back capping discs
• Capping disc position is adjustable while the machine is running, without opening the safety covers.
• Fully adjustable for bottle cap sizes ranging from 8 mm to 130 mm in diameter

Bottle belts features:

• Bottle belt width adjusted via front knobs
• Bottle belt height adjusted via front knobs
• Heavy duty gear drive mechanism, no belts used for power transmission.
• Adjustable speed heavy duty 1/2 Hp, motor gearbox
• Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers. 
• Optional double belt assembly with independent height and angle adjustment

Waterfall feeder features:

• Construction in stainless steel
• 18 inch wide belt
• Cap feeder is adjustable for bottle caps from 8mm to 110mm in diameter, via quick adjust knobs
• Caps feed on demand, controlled by photoelectric sensor
• Air shutoff valve controlled by photoelectric sensor
• Includes air regulator and filter
• Feeder inclination adjustable from 0 to 5 degrees
• Complete height adjustment by structure 1 inch bolts and/or cap delivery system.
• 10 cubic foot cap hopper
• Drive provided by DC gear motor.
• Independent Speed Control (potentiometer)

Vertical cap placement features:

• Construction in stainless steel and aluminum
• Caps feed on demand, controlled by photoelectric sensor
• Powered by 750W AC Servo motor
• Bottle handling using pneumatic cylinders

Electric and pneumatic requirements:

• 220 Volts, Single phase, 50/60Hz, 15 Amps.
• 10 CFM @ 80 p.s.i.

ACASI Inline Bottle Capper with Vibratory Cap Feeder
Model TruCap-X-Vib

Starting Prices: 

Tightener Features: 

• Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors.
• Heavy duty linear carriage system for height adjustability.
• All shafts and threaded rods manufactured in 304 stainless steel.
• Heavy duty casters standard.
• No change of parts needed for a wide range of containers.
• Front covers with safety interlock switches standard.
• Top driven to insure no product spillage into drive assembly.
• Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment).

• 4, 6, or 8 spindle configurations available, single gear box driven.
• Independent spring loaded bottle capping discs for better torque and misalignment forgiveness.
• Torque is able to be adjusted while the machine is running (When pneumatic clutch option is purchased).
• Clutches located away from capping discs to avoid corrosion.
• Heavy duty gear driven mechanism, no belts used for power transmission.
• Adjustable speed 3/4 Hp drive motor for capping discs.
• Optional second drive motor to rotate the first set of capping discs on the opposite direction.
• Capping head assembly manufactured in 316L stainless steel 95% of manufactured parts are in stainless steel, or FDA approved polymer materials.
• Independent adjustment for front or back capping discs.
• Capping disc position is adjustable while the machine is running, without opening the safety covers.
• Fully adjustable for cap sizes ranging from 8 mm to 130 mm in diameter.

• Bottle belt width adjusted via front knobs.
• Bottle belt height adjusted via front knobs.
• Heavy duty gear drive mechanism, no belts used for power transmission.
• Adjustable speed heavy duty 1/2 Hp, motor gearbox.
• Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers. Optional double belt assembly with independent height and angle adjustment.
• Optional double belt assembly with independent heifht and angle adjustment.

Vibratory cap feeder features:

• Aluminum casting with polyuretrane liner to minimizes cap markings-scratching.
• 24-32 inch diameter feeding disc - ramp assembly.
• Bad caps rejected mechanically, minimum air usage.
• Cap by deman controlled by photoelectric sensor.
• Bowl tooled for one model cap.
• Adjustable vibration and speed control.
• Heavy duty extra heavy base for better vibration transmission.
• Sortes mounted on machine, no need for independent height adjustment.
• Includes filter pressure regulator.
• Flow controls on all air hoses.

Cap hopper feature:

• 3 Cubic feet stainless steel deposit.
• Vibrator with independent control mounted on cap hopper.
• Low friction limit switch for cap level sensing on centrifugal cap feeder.

Electric and pneumatic requirements:

• 220 Volts, Single phase, 50/60Hz, 15 Amps.
• 10 CFM @ 80 p.s.i.