Automatic Inline Bottle Capping Machine Model CAI-X-Cent

ACASI Inline capper Model CAIX-5200 
CAIX-5200 Starting Prices
4 Spindle CAI4-5200: 
6 Spindle CAI6-5200: 
8 Spindle CAI8-5200: 

Tightener Features

  • Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
  • Heavy duty linear carriage system for height adjustability
  • All shafts and threaded rods manufactured in 304 stainless steel.
  • Heavy duty casters standard
  • No change of parts needed for a wide range of containers
  • Front and back covers with safety interlock switches standard
  • Top driven to insure no product spillage into drive assembly
  • Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment).
Capping discs features:
  • 4, 6, or 8 spindle configurations available, single gear box driven
  • Independent spring loaded capping discs for better torque and misalignment forgiveness.
  • Torque is able to be adjusted while the machine is running
  • Clutches located away from capping discs to avoid corrosion
  • Heavy duty gear driven mechanism, no belts used for power transmission
  • Mechanical clutch assemblies standard (Optional pneumatic clutch upgrade available)
  • Adjustable speed 1 Hp 3 phase drive motor for capping discs
  • Optional second drive motor to rotate the first set of capping discs on the opposite direction
  • Most bearings protected by seals
  • Capping head assembly manufactured in 316L stainless steel
  • All parts manufactured in stainless steel, or FDA approved polymer materials
  • Independent adjustment for front or back capping discs
  • Capping disc position is adjustable while the machine is running, without opening the safety covers.
  • Fully adjustable for caps sizes ranging from 8 mm to 130 mm in diameter.
Bottle belts features: 
  • Bottle belt width adjusted via front knobs
  • Bottle belt height adjusted via front knobs
  • Heavy duty gear drive mechanism, no belts used for power transmission.
  • Adjustable speed heavy duty 1 Hp, 3 phase motor gearbox
  • Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers.
  • Optional double belt assembly with independent height and angle adjustment.
Electric and pneumatic requirements:
  • 208 - 240 Volts, Single phase, 50/60Hz, 15 Amps.
  • 5 CFM @ 80 p.s.i. 
Centrifugal type cap feeder features:
  • Construction in stainless steel.
  • 32 inch diameter feeding disc - ramp assembly.
  • Cap rejecting by photoelectric sensor.
  • Cap by demand controlled by photoelectric sensor.
  • Standard 4 pieces slotted cross for easy tooling adjustment.
  • Easy changeover for caps from 10mm to 90mm in diameter.
  • Easy changeover for caps from 0.125 to 2.5 inches in height.
  • Sorter mounted on machine, no need for independent height adjustment.
  • Includes filter pressure regulator.
  • Flow controls on all air hoses.
  • Adjustable vibration system on cap hopper.
  • Force provided by 1/3 Hp DC gear motor.
  • Speed control by potentiometer.
Cap hopper features:
  •  3 Cubic feet stainless steel deposit.
  •  Vibrator with independent control mounted on cap hopper. 
  •  Low friction limit switch for cap level sensing on centrifugal cap feeder.
    • Upgrade of each set of clutches 
    • Double belt assembly, independent belt, height adjustable 
    • Power height adjustment upgrade 
    • Additional drive motor to reverse the first set of spindles 
    • Class 1 Division 1 Explosion Proofing 
    • Spacing wheel assembly to control bottle feed into machine 
    • Bottle reject system, with laser sensor for uncapped containers or cross threaded caps. Includes dump table. 
    • Pressure cap wheel 
    • Nylon U Channel for spray and pump tightening 
    • Cap alternating system 
    • 10 Ft. Conveyor, acetyl chain, 4.5 in. wide, speed control installed in conveyor 
    • Each additional foot up to a maximum conveyor length of 20 feet 
    • Each additional foot of guide rails 

    Related products